Placement Guide

Choose where you would like your embroidery to be placed on your garment.

The final position may be adjusted slightly depending on the size and shape of your logo, as each design is different. Our aim is to keep the embroidery looking balanced and proportionate on the garment.

Left Chest / Right Chest

  • Embroidery is placed on the left or right side of the chest.

  • This is a compact, professional placement suitable for logos, business names or branding.

  • Recommended embroidery width: 60–100 mm.

  • The logo is positioned approximately:

    • 160–180 mm down from the collar and shoulder area, or

    • 80–90 mm down from the lower point of a crew neck.

  • If the garment has a breast pocket:

    • The embroidery is positioned approximately 20 mm above the top edge of the pocket.

    • The logo is centred relative to the pocket.

Centre Chest

  • Embroidery is placed centrally across the front of the garment.

  • This provides a more prominent front-facing placement than left or right chest.

  • Recommended embroidery width: 100–150 mm.

  • The logo is positioned approximately:

    • 190–210 mm down from the collar and shoulder area, or

    • 100 mm down from the lower point of a crew neck.

Back

Upper Back / Back Yoke

  • Embroidery is placed high on the back, directly below the collar.

  • Recommended width: 80–120 mm.

  • The top of the logo is positioned approximately 50 mm below the collar.

  • The logo is centred across the garment.

  • This creates a smaller, higher-positioned back logo.

Centre Back

  • Embroidery is placed centrally across the main back area.

  • Recommended width: 150–240 mm.

  • The top of the logo is positioned approximately 160–170 mm down from the collar and shoulder area.

  • For hoodies, the position is approximately 180–190 mm down.

  • The logo is centred horizontally on the garment.

  • This provides a larger and more prominent back placement.

Lower Back

  • Embroidery is placed toward the lower section of the back.

  • Recommended width: 150–360 mm.

  • The logo should be positioned at least 20 mm above the bottom edge of the garment.

  • This allows for a wider and more prominent embroidery design.

Sleeves

Left Sleeve 

  • Embroidery is placed on the left sleeve.

  • Maximum recommended size: 70 mm diameter.

  • The logo is positioned approximately 90–100 mm down from the sleeve and shoulder seam.

Right Sleeve

  • Embroidery is placed on the right sleeve.

  • Maximum recommended size: 70 mm diameter.

  • The logo is positioned approximately 90–100 mm down from the sleeve and shoulder seam.

Sleeve Cuff

  • Embroidery is placed close to the bottom edge of the sleeve.

  • The recommended position is approximately 20 mm above the sleeve edge.

  • Because this is a smaller area, the embroidery will be more compact.

Pants & Shorts

Left Front

  • Embroidery is placed toward the left front corner of the garment.

  • Recommended width: 60–90 mm.

Right Front

  • Embroidery is placed toward the right front corner of the garment.

  • Recommended width: 60–90 mm.

Left Rear

  • Embroidery is placed toward the left rear area of the garment.

  • Recommended width: 60–90 mm.

Right Rear

  • Embroidery is placed toward the right rear area of the garment.

  • Recommended width: 60–90 mm.

Caps & Hats

Front Centre

  • Embroidery is placed on the front centre of the cap.

  • Maximum recommended height: 55 mm.

  • Recommended width: 60–120 mm.

  • This is the main front-facing embroidery position.

Left Side Panel

  • Embroidery is placed on the left side panel.

  • Maximum height: 55 mm.

  • Maximum width: 80 mm.

Right Side Panel

  • Embroidery is placed on the right side panel.

  • Maximum height: 55 mm.

  • Maximum width: 80 mm.

Back Centre

  • Embroidery is placed at the centre of the back of the cap.

  • Recommended width: 60–90 mm.

  • Recommended height: 8–12 mm.

  • This position is suited to a smaller or horizontally oriented design.

Rear Side Panel

  • Embroidery can be placed on either the left or right rear side panel.

  • Maximum width: 70 mm.

  • Recommended height: 10–25 mm.

  • This provides a smaller, more discreet embroidery position.